high effcient rotary driver

1.Rotary Dryer is for Metallurgy/chemical/construction industry
2.Max Production Capacity 45t/h
3.A New-kind rotary driver
1.The rotary driver--applies to the vertical column preheating and the clinker calcination.
2.The furnace is constituted of the main body, the supporting foundation, the driving system, the kiln entrance, the coal injection device, and the sealing device of the lower end and the upper end of the furnace.
3.With reliable functioning and large drying capacity, the Hstyle rotary dryer is welcome in many fields

Type(m)
Production
Capacity(t/h)
Speed of
cylinder(r/min)
Main motor
Final drive
Weight(t)
Type
Power(kw)
Type
Speed ratio
Φ1.6×39
3.5-4.0
0.53-1.59
JZT-71-4
22
ZS145-9-I
125
71
Φ2.2×34
3.0-5.0
0.5-2.0
YCT315- 4A
37
ZS145-5-I
80
110
Φ2.4×34
4.0-5.0
0.5-2.0
YCT315-4A
37
ZS145-5-I
80
116
Φ2.5×40
7.0-13
0.48-1.7
YCT315-4B
45
ZS145-7-I
100
131
Φ3.0×48
15
0.7-3.48
Z2-111
100
ZL130-14-I
31.5
224
Φ3.0×48
20-25
0.7-3.48
Z2-111
100
ZL130-14-I
31.5
191
Φ3.0×48
27.5
0.7-3.48
Z2-111
100
ZL130-14-I
31.5
237
Φ3.2×46
41.7
0.6-3.01
Z2-112
125
ZL130-15-I
35.5
237
Φ1×10
2-2.5
6
Y160L-8
7.5
ZQ50-20
20
10.2
Φ1.2×10
2.5-3
6
Y160L-8
7.5
ZQ50-20
20
9.3
Φ3.2×46
4.5-9.5
5
Y180L-6
15
ZQ65-31.5
31.5
16.79
Φ3.2×46
7.0-8.0
3.19
Y200L2-6
22
ZQ75-50
20
16.07
Φ2×18
6.0-8.0
4.8
Y180L-6
15
ZQ65-31.5 I
31.5
23.544
Φ3.2×488.0-10
3.85
Y250M-8
30
ZQ75-25
25
30.39

compact structure coal slime rotary dryer

1.reasonable structure
2.high efficiency, low energy consumption
3.convenient for transport.
1. What is the
Rotary Dryer
can be used for ?
This machine can dry many kinds of materials which contain moisture, such as coal, coal slurry, slag, industrial waste, and clay stone. They are widely used in building materials, metallurgy, and chemical industry.

2. what is the
Rotary Dryer
consist of
the Drying Machine is formed by rotary body, lifting blade, driving device, supporting device and sealing ring.

3. Can I use the coal or gas as the heating source?
Yea
,
you can use coal, gas, electricity, oil and wind power to heat the dryer machine.

Model
Specifications
Speed
(r/m)
Power
(kw)
Weight
(T)
Diameter
(m)
Length
(m)
Gradient
(%)
Φ1&tim es;12M
1.0
12
5
6.2
7.5
13.2
Φ1.2×12M
1.2
12
5
5.99
11
15.7
Φ1.2×14M
1.2
14
5
3.99
11
17.3
Φ1.5×12M
1.5
12
5
4.02
15
17.4
Φ1.8×14M
1.8
14
5
4.59
18.5
27.2
Φ1.8×16M
1.8
16
5
5.48
22
39.6
Φ2.0×14M
2.0
14
5
4.59
18.5
31.6
Φ2.0×16M
2.0
16
5
4.59
30
43.9
Φ2.2×14M
2.2
14
5
4.59
22
37.4
Φ2.2×27M
2.2
27
5
4.58
37
79.2
Φ2.4×14M
2.4
14
5
3.6
30
46.2
Φ2.4×18M
2.4
18
5
3.12
37
66.7
Φ2.8×18M
2.8
18
5
3.12
45
89.3
Φ3.0×20M
3.0
20
5
3.67
55
95.5
Φ3.2×22M
3.2
22
5
3.4
75
141.6
Φ3.6×25M
3.6
25
5
3.1
110
188.6
SINON Machinery Manufacturing Co,.Ltd
Address:North of Yong'an Road,Gongyi city,Henan Province,China
Tel +8637169537555
+8637164373688
Fax +8637164373899

Cow dung drying equipment

Our cow dung drying equipment as a corollary equipment of organic compound fertilizer production line,can make fine particles.
Introduction of cow dung drying equipment:
With the development of agriculture, agricultural by-products has been taking more attention.
Manure's pollution on environment is increasing, but the dung is rich in nutrients and trace elements which is a good organic fertilizer.Cow dung as an organic compound fertilizer, not only turning waste into treasure, but also can reduce environmental pollution and prevent the spread of the disease.It also has good economic and social benefits.Our cow dung drying equipment as a corollary equipment of organic compound fertilizer production line,can make fine particles.Meanwhile it can be used not only as culture medium,planting edible fungus agaricus bisporus,but also can be use d as breeding the feed of turtle,fish,snails,chicken,duck,etc.
Cow dung drying equipment is a Low-fuel-consumption and high efficiency drying machine.It can be used to dry the dung with moisture content 70%-80% to a final below 13% only one time. The whole process in a closed system,thereby reduce to pollute the environment.Chicken manure drying equipment is contented by heating source,loading machine,feeder,rotary rolling tube,unloading machine,exhauster,unloader and power distribution cabinets. The wet material is put into the drying equipment after dehydration.The material can disperse evenly and contact fully with the hot air in the drying equipment through the stirring of the plate which is in the roller.
Thus quicken the speed of drying,heat transfering and mass transfering.In the process of drying,the material can be sent out by the star unloading valve which is in the other end of the drying equipment under the action of the gradient plate and the hot mass.

.Main features
1.Cow dung drying equipment has a high degree of mechanization, large production capacity and continuous operation.
2.Structure was simple and excellent . Materials running smoothly through the cylinder's resistance.The operating is convenient.
3. low malfunction, lower maintenance cost, low power consumption.
4.Wide scope of application, good uniformity of drying products
5.When it is drying at the same time can achieve the purpose of sterilization and deodorization.

. Technical specification
NO
Specification of the common equipment
YXC800
YXC 1200
YXC 1500
YXC 1800

YXC 2000

YXC 2200
Note
1
The output of drying chicken manure
2-5T
10-22T
18-24T
25-30T

30-38T

38-48T
Moisture content below 75%
2
The output of drying cow dung drying equipment
3-5T
12-24T
20-25T
28-32T

32-40T

40-50T
Moisture content below 65%
3
Total in stallation power
7.5kw
15kw
22kw
28kw

32kw

37kw
?
Commonly used size range:diameterΦ0.8-3,length 8-15m

SG-240A recyling granulator

Recyling granulator
No water/binder/drying
Short process flow, low consumption
High strength/bulk density
Physical press
Recyling granulator o
perating principle:
The machine adopts the couple roller. Between the rollers, there is certain gap. Using double output shaft reduction Machine, makes the couple roller in phase and run face to face. One group of roller axle seat is fixed and another group of roller axle seat is slipped. With the support of the pressure of hydraulic cylinder, they are close to each other and the hydraulic system can has the action of compensation and protection. In the surface of the roller, the hole (arc trough) of many shapes and same size are arrayed. According to the different compression rate of the materials, choose the trough of one roller aiming at the trough of another roller, or peak to trou gh. Two rollers is arranged in horizon. The powder material on itself weight is compulsorily feed into the gap between two rollers over the rollers continuously and equally. When the material enters into the gripping area, it is gripped by the roller. With the continuous turning or the roller, the occupied space of the material is less and less and gradually compressed and reaches the max value of the formation pressure. Then, the pressure gradually reduces. The flakes due to its elasticity and self weight breaks off the arc trough, and enter into the cutting and granulation device and sieves into the grain.
Recyling granulator technical parameter:
a).roller diameter: 240mm available width: 80/120/160mm
b).roller turning speed: 5-35rpm.
c).compulsory feeder: 4kw motor frequency conversion speed adjusting.
d).accumulator pre-pressurization: 5Mpa
e).allowable max. formation pressure rate: 65kn/cm
f). powder flaking thickness: 2 - 6mm
g).flaking product ivity: 0.8-2t/h
h).power of flaking principal machine: 11kw
i).installed capacity: about 35kw
j).dimension (L×W×H) : 1850×1500×1650
k).weight: about 4.5t
(l).outpt: 200-600kg/h
(m).granularity:1-5mm
Recycling granulator line components:
1) Ration feeding device: Composed of raw material silo and star type charger with fixed amount transportation, 0.75kw power, 4L/rpm, frequency conversion speed adjustment.
2) Compulsory feeding machine: Composed of charger with 4kw frequency conversion speed adjusting motor, taper helix, agitator knife, taper charger with observation window and feeding bucket. This is to further finish degasification and pre-compress the powder.
3) Compacter: Composed of fixed axle seat and slipped axle seat, two alloy steel rollers, two hydraulic cylinder and pump, double output reduction machine, Type GIICL drum jugged shaft coupling and 11kw electromotor set.
4) Grinding machine: Grinding chamber, cutting principal axis, 19 pieces of multi-teeth rotation knife and comb plate composes the grinding chamber. The principal axis driven by 4kw motor to rotate cut the flakes in high feed. The cutting speed is 750~900rpm.
5) Granulator: Composed of granulation chamber, granulation principal axis, 10 pieces of turning cut knife and the U type screen mesh (grain size as per customer request) with the hole diameter 0.5~5mm. 5.5kw motor-wheel drives the principal axis to granulating. The granulation turning speed: 150~250rpm.
6) Electrical control cabinet: Composed of electrical control box, frequency conversion speed adjusting controller, ammeter, voltmeter, instruction light, button, voltage conversion switch, etc.
7) Vibrating screen: (one set) the grinded material from the grinding and granulator is screened into the grain by this machine and recycled powder. SFJH0.8×2C
8) Bucket hoisting machine HL160. Equipped based on the request.
Recycling granulator applications:
1.fertilizer:

Potassium Sulfate(SOP), potassium chloride, Russia red potassium, potassium nitrate, ammonium chloride, Ammonium Phosphate Monobasic, Diammonium phosphate(DAP), NPK compound fertilizer, import Russia Potassium Sulfate(SOP), ground phosphorite, NH4SO4, concentrated superphosphate, humic acid etc.
2.power material
zinc oxide, lead oxide, calcium chloride, calcium phosphate, High test bleaching powder, cryolite, chemical inhibitor, silica, Isophthalodinitrile etc.
3.chemical raw material, fine chemical material
4.desulfurization gypsum
5.coal power
Note:
It takes potassium sulphate(SOP) for example, all above parameter will be different in accordance with the material to be granulated.

vertical dryer for briquette coal (patent)

vertical dryer for briquette coal (patent)
1.the investment has been reduced by 50%
2.high efficiency
3.top quality
vertical dryer for briquette coal (patent) introduction:
The vertical drying machine series designed and developed in our plant have been awarded the patent rights by the National Administration of Intellectual Property Rights as well as the patent certificates. It can be used in the coal industry as well as the drying of the balling in the production of the briquettes. The advantages of the machines are that you can benefit a lot by investing little and it takes up small space and there is no abrasion or maintaining of it. It can get the excellent effect. It is the most ideal equipment for large and medium-sized companies in the production lines.

Cow Dung Drying Machine

drying equipment
1. high-efficiency operation
2. easy maintenance
3. stable performance
4. low energy consumption
Feature:
This dryer is formed by rotary body, lifting blade, driving device, supporting device and sealing ring, the dryer has advantages oreasonable structure, high efficiency, low energy consumption and convenient for transportation.

Application:
The indirect heat transfer dryer made by our factory is mainly used in building materials, metallurgy, chemical industry, cement plant for drying of limestone slag, coal power, slag, clay stone.

Dryer technical parameters:

Shell diameter x shell length
Inside diameter of out shell(mm)
Inside diameter of inner shell(mm)
Shell length(m)
Shell cubage(m³)
Shell obliquity
Lifting blade form
Highest inlet air temperature(&or dm;C)
Dimensions(m)
1.5 x 15m

1.5 x 17m

1.5 x 19m

1500
500
15

17

19
20.27

22.97

25.68
3-5%
Lifting form
850
16.2 x 2.7 x 2.7
18.2 x 2.7 x 2.7
20.0 x 2.9 x 2.9
1.8 x 21m

1.8 x 23m

1.8 x 25m
1800
650
21

23

25
35.91

39.33

42.75
3-5%
Lifting form
850
22.5 x 2.7 x 2.7
24.5 x 2.9 x 2.9
26.5 x 2.9 x 2.9
2.2 x 21m

2.2 x 23m

2.2 x 25m
2200
800
21

23

25
58.10

63.61

69.15
3-5%
Lifting form
850

Hot sale rotary drier

Hot sale rotary drier
1.High reliability
2.Energy-saving
3.Robust structure
4.More than15 years experience



Rotary Drier:
Rotary drier is widely used for drying materials in industries like cement, mine, building materials, chemistry, food and fertilizer, etc. This rotary drying machine comes with thermocouples on the feeding and discharging device to control the temperature. Thermometers are also adopted so as to better control the working temperature (generally 350-380°) of the rotary drier.
The Working Principle of rotary drier:

The auto-combustion device provides heat resource for our rotary drier, which adopts down-flow heating method. When the mineral materials are fed into the cylinder, it flows down as a result of gravity. Meanwhile, they are repetitively scattered in the air so that they ar e in full contact with the hot air. The material is thus dried gradually.
Technical Specification of Rotary Drier
type(mm)
indiclination(%)
rotation speed(r/min)
input tempreture(ºC)
motor power(kw)
outpur(t/h)
weight(t)
GZΦ800×8000
5
7.5
≤700
4-6
0.8-2.0
3.5
GZΦ1000×10000
5
6.19
≤700
5.5-7.5
1.0-3.5
5.6
GZΦ1200×10000
5
5.3
≤700
11-13
1.8-5
14.04
GZΦ1500×12000
5
4.5
≤800
13-15
3.3-7.5
17.76
GZΦ1800×14000
5
3.3
≤800
18.5
5-9
29
GZΦ2200×120000
5
3.0
≤700
22
6-12
33
GZΦ2400×18000
5
2.5
≤800
30
10-15
53.3